Support Center » Knowledgebase » Status Message: No Signal - DVB-T/DTT (Part 2)
 Status Message: No Signal - DVB-T/DTT (Part 2)
Solution  This error can happen for a few different reasons, most of them relating to problems getting video from the source to the EyeTV software.

If the basic troubleshooting steps on this page did not help, then please try these additional steps:




5) The EyeTV software may need to be reset.

Solution: Quit the EyeTV software, and then restart it.






6) The EyeTV hardware may need to be reset.

Solution: Unplug the EyeTV hardware from the Mac, power source, and video source. Wait a minute, and then attach everything again.




7) The connection between the EyeTV device and the Mac may be damaged or defective.

Solution: If the EyeTV unit is connected via USB or Firewire, then try another USB or Firewire cable. Try another port on your Mac, and also restart your Mac.




8) Aerial is damaged or defective.

Solution: Try aerial with another DVB-T/Freeview reciever. If you are unable to receive a signal on your other receiver than the aerial may be damaged or defective.




9) EyeTV hardware has a damaged or defective video input.

Solution: If the video problem exist with a certain antenna, try connecting another antenna to EyeTV.

If the second antenna has the same problem, then it's possible that the EyeTV unit has a hardware problem with the video input.




10) Coaxial cable splitter may be damaged or defective.

Solution: Try to connect EyeTV directly to the aerial, with no splitter in between. If that works, then try EyeTV with each port on the splitter, to see if some ports work better than others.





11) EyeTV software may be damaged or defective.

Solution: EyeTV's Preference files or the actual EyeTV application may be corrupted in some way. Move the EyeTV application to the trash, and install it again.




If none of these steps help, then please contact Elgato Technical Support for further troubleshooting.

You can visit http://support.elgato.com to report your problem. Please let us know that you tried the steps in this article.

We would also like you to send us more information about your Mac:

1) Choose About This Mac from the Apple Menu.
2) Press the More Info... button to start the System Profiler application
3) Select Save As... from the File Menu
4) Save the report as System Profiler 4.0 (XML) format
5) Attach this file to your support ticket

We would also want to receive a record of your Auto Tune process:

1) Locate your EyeTV Archive folder. It may be in the Documents folder.
2) If you can't find it, then visit the EyeTV Preferences and choose the Recording section. The path to your EyeTV Archive will be listed there.
3) Locate the EyeTVAutoTune.log.
4) Attach this file to your support ticket.


Article Details
Article ID: 3165
Created On: 09 Oct 2008 10:09 PM

 This answer was helpful  This answer was not helpful
 Back
 Search
Loading
 Article Options
Home | Contact Tech Support | Knowledgebase | Downloads | English | Deutsch | Français |

Help Desk Software By Kayako eSupport v3.40.01